iganea9
June 6, 2023, 7:52pm
1
Relationships between nodes are not created.
// THE EXPERIMENT “THERMOTOLERANCE”
// Varieties
CREATE (clav: Variety {id: 1, var: 'Clavera'}),
(horb: Variety {id: 2, var: 'Horboveanca'});
// Biostimulatory
CREATE (ctrl: Control {id: 1, ctrl: 'Control Untreated'}),
(ctt: CtrlTTherm { id: 2, name: 'Control Treated Thermal'}),
(ureg: UBiostim { id: 3, comp: 'Reglalg Untreated Thermal'}), (treg: TBiostim { id: 4, comp: 'Reglalg Treated Thermal'});
// Params
CREATE(rl: Param{id: 1, param: 'Root Langth'}), (stl: Param{id: 2, param: 'Stem Length'}), (fs: Param{id: 3, param: 'Fresh Stem'}), (fr: Param{id: 4, param: 'Fresh Root'}), (ds: Param{id: 5, param: 'Dry Stem' }),
(dr: Param{id: 6, param: 'Dry Root'}),
(rv: Param{id: 7, param: 'Root Volume'}), (hp: Param {id: 8, param: 'Hypocotyl'}), (ep: Param {id: 9, param: 'Epycotyl'});
// SET uuid
WITH randomUUID() as uuid
// Variety
MATCH (clav: Variety) WHERE clav.id = 1 SET clav. uuid = uuid WITH clav, uuid
MATCH (horb: Variety) WHERE horb.id = 2 SET horb. uuid = uuid WITH clav, horb, uuid
//Biostims
MATCH (ctrl: Control) WHERE ctrl.id = 1
MATCH (ctt: CtrlTherm) WHERE ctt.id = 2
MATCH (ureg: UBiostim) WHERE ureg.id = 3
MATCH (treg: TBiostim) WHERE treg.id = 4
//Params
MATCH (rl:Param) WHERE rl.id = 1
MATCH (stl:Param) WHERE stl.id = 2
MATCH (fs:Param) WHERE fs.id = 3
MATCH (fr:Param) WHERE fr.id = 4
MATCH (ds:Param) WHERE ds.id = 5
MATCH (dr:Param) WHERE dr.id = 6
MATCH (rv:Param) WHERE rv.id = 7
MATCH (hp:Param) WHERE hp.id = 8
MATCH (ep:Param) WHERE ep.id = 9
WITH randomUUID() as uuid
//Variety -> Biostim
MERGE (clav) - [ rel1: UNTREATED ] -> (ctrl) SET rel1. uuid = uuid
MERGE (clav) - [ rel2: TREATED_THERMAL ] -> (ctt) SET rel2. uuid = uuid
MERGE (clav) - [ rel3: UNTREATED_THERMAL ] -> (ureg) SET rel3. uuid = uuid
MERGE (clav) - [ rel4: TREATED_THERMAL ] -> (treg) SET rel4. uuid = uuid
MERGE (horb) - [ rel5: UNTREATED ] -> (ctrl) SET rel5. uuid = uuid
MERGE (horb) - [ rel6: TREATED_THERMAL ] -> (ctt) SET rel6. uuid = uuid
MERGE (horb) - [ rel7: UNTREATED_THERMAL ] -> (ureg) SET rel7. uuid = uuid
MERGE (horb) - [ rel8: TREATED_THERMAL ] -> (treg) SET rel8. uuid = uuid
// Root length (cm)
MERGE (ctrl) - [ rel9: MEASURES { cm: 14.2 }] -> (rl) SET rel9. uuid = uuid
MERGE (ctt) - [ rel10: MEASURES { cm: 1.83 }] -> (rl) SET rel10. uuid = uuid
MERGE (ureg) - [ rel11: MEASURES { cm: 11.7 }] -> (rl) SET rel11. uuid = uuid
MERGE (treg) - [ rel12: MEASURES { cm: 1.83 }] -> (rl) SET rel12. uuid = uuid
// Stem length (cm)
MERGE (ctrl) - [ rel13: MEASURES { cm: 38.2 }] -> (stl) SET rel13. uuid = uuid
MERGE (ctt) - [ rel14: MEASURES { cm: 36.0 }] -> (stl) SET rel14. uuid = uuid
MERGE (ureg) - [ rel15: MEASURES { cm: 48.8 }] -> (stl) SET rel15. uuid = uuid
MERGE (treg) - [ rel16: MEASURES { cm: 43.3 }] -> (stl) SET rel16. uuid = uuid
// Weight of fresh stem
MERGE (ctrl) - [ rel17: WEIGHS { grams: 1.19 }] -> (fs) SET rel17. uuid = uuid
MERGE (ctt) - [ rel18: WEIGHS { grams: 1.19 }] -> (fs) SET rel18. uuid = uuid
MERGE (ureg) - [ rel19: WEIGHS { grams: 1.51 }] -> (fs) SET rel19. uuid = uuid
MERGE (treg) - [ rel20: WEIGHS { grams: 1.23 }] -> (fs) SET rel20. uuid = uuid
// Weight of fresh root
MERGE (ctrl) - [ rel21: WEIGHS { grams: 0.597 }] -> (fr) SET rel21. uuid = uuid
MERGE (ctt) - [ rel22: WEIGHS { grams: 0.493 }] -> (fr) SET rel22. uuid = uuid
MERGE (ureg) - [ rel23: WEIGHS { grams: 0.58 }] -> (fr) SET rel23. uuid = uuid
MERGE (treg) - [ rel24: WEIGHS { grams: 0.667 }] -> (fr) SET rel24. uuid = uuid
// Weight of dried stem
MERGE (ctrl) - [ rel25: WEIGHS { grams: 0.153 }] -> (ds) SET rel25. uuid = uuid MERGE (ctt) - [ rel26: WEIGHS { grams: 0.149 }] -> (ds) SET rel26. uuid = uuid
MERGE (ureg) - [ rel27: WEIGHS { grams: 0.188 }] -> (ds) SET rel27. uuid = uuid
MERGE (treg) - [ rel28: WEIGHS { grams: 0.153 }] -> (ds) SET rel28. uuid = uuid
// Weight of dried root
MERGE (ctrl) - [ rel29: WEIGHS { grams: 0.0366 }] -> (dr) SET rel29. uuid = uuid
MERGE (ctt) - [ rel30: WEIGHS { grams: 0.0305 }] -> (dr) SET rel30. uuid = uuid
MERGE (ureg) - [ rel31: WEIGHS { grams: 0.0389 }] -> (dr) SET rel31. uuid = uuid
MERGE (treg) - [ rel32: WEIGHS { grams: 0.414 }] -> (dr) SET rel32. uuid = uuid
// Root volume
MERGE (ctrl) - [ rel33: MEASURES { ml: 2.0 }] -> (rv) SET rel33. uuid = uuid
MERGE (ctt) - [ rel34: MEASURES { ml: 1.6 }] -> (rv) SET rel34. uuid = uuid
MERGE (ureg) - [ rel35: MEASURES { ml: 2.0 }] -> (rv) SET rel35. uuid = uuid
MERGE (treg) - [ rel36: WEIGHS { grams: 2.2}] -> (rv) SET rel36. uuid = uuid
// Length of the hypocotyl (cm)
MERGE (ctrl) - [ rel37: MEASURES { cm: 11.0 }] -> (hp) SET rel37. uuid = uuid
MERGE (ctt) - [ rel38: MEASURES { cm: 10.3 }] -> (hp) SET rel38. uuid = uuid
MERGE (ureg) - [ rel39: MEASURES { cm: 13.3 }] -> (hp) SET rel39. uuid = uuid
MERGE (treg) - [ rel40: MEASURES { cm: 11.0 }] -> (hp) SET rel40. uuid = uuid
// Epicotile length (cm)
MERGE (ctrl) - [ rel41: MEASURES { cm: 17.8 }] -> (ep) SET rel41. uuid = uuid
MERGE (ctt) - [ rel42: MEASURES { cm: 17.7 }] -> (ep) SET rel42. uuid = uuid
MERGE (ureg) - [ rel43: MEASURES { cm: 21.0 }] -> (ep) SET rel43. uuid = uuid
MERGE (treg) - [ rel44: MEASURES { cm: 11.0 }] -> (ep) SET rel44. uuid = uuid
// Horboveanca variety
// Root length (cm)
WITH randomUUID() as uuid
MERGE (ctrl) - [ rel45: MEASURES { cm: 14.2 }] -> (rl) SET rel45. uuid = uuid
MERGE (ctt) - [ rel46: MEASURES { cm: 12.8 }] -> (rl) SET rel46. uuid = uuid
MERGE (ureg) - [ rel47: MEASURES { cm: 14.2 }] -> (rl) SET rel47. uuid = uuid
MERGE (treg) - [ rel48: MEASURES { cm: 13.8 }] -> (rl) SET rel48. uuid = uuid
// Stem length (cm)
MERGE (ctrl) - [ rel49: MEASURES { cm: 60.8 }] -> (stl) SET rel49. uuid = uuid
MERGE (ctt) - [ rel50: MEASURES { cm: 61.8 }] -> (stl) SET rel50. uuid = uuid
MERGE (ureg) - [ rel51: MEASURES { cm: 67.6 }] -> (stl) SET rel51. uuid = uuid
MERGE (treg) - [ rel52: MEASURES { cm: 60.8 }] -> (stl) SET rel52. uuid = uuid
// Weight of fresh stem
MERGE (ctrl) - [ rel53: WEIGHS { grams: 1.53 }] -> (fs) SET rel53. uuid = uuid
MERGE (ctt) - [ rel54: WEIGHS { grams: 1.46 }] -> (fs) SET rel54. uuid = uuid
MERGE (ureg) - [ rel55: WEIGHS { grams: 1.68 }] -> (fs) SET rel55. uuid = uuid
MERGE (treg) - [ rel56: WEIGHS { grams: 1.5 }] -> (fs) SET rel56. uuid = uuid
// Weight of fresh root
MERGE (ctrl) - [ rel57: WEIGHS { grams: 1.0 }] -> (fr) SET rel57. uuid = uuid
MERGE (ctt) - [ rel58: WEIGHS { grams: 0.936 }] -> (fr) SET rel58. uuid = uuid
MERGE (ureg) - [ rel59: WEIGHS { grams: 1.4 }] -> (fr) SET rel59. uuid = uuid
MERGE (treg) - [ rel60: WEIGHS { grams: 1.18 }] -> (fr) SET rel60. uuid = uuid
// Weight of dried stem
MERGE (ctrl) - [ rel61: WEIGHS { grams: 0.264 }] -> (ds) SET rel61. uuid = uuid
MERGE (ctt) - [ rel62: WEIGHS { grams: 0.326 }] -> (ds) SET rel62. uuid = uuid
MERGE (ureg) - [ rel63: WEIGHS { grams: 0.327 }] -> (ds) SET rel63. uuid = uuid
MERGE (treg) - [ rel64: WEIGHS { grams: 0.328 }] -> (ds) SET rel64. uuid = uuid
// Weight of dried root
MERGE (ctrl) - [ rel65: WEIGHS { grams: 0.065 }] -> (dr) SET rel65. uuid = uuid
MERGE (ctt) - [ rel66: WEIGHS { grams: 0.0648 }] -> (dr) SET rel66. uuid = uuid
MERGE (ureg) - [ rel67: WEIGHS { grams: 0.0816 }] -> (dr) SET rel67. uuid = uuid
MERGE (treg) - [ rel68: WEIGHS { grams: 0.078 }] -> (dr) SET rel68. uuid = uuid
// Length of the hypocotyl (cm)
MERGE (ctrl) - [ rel69: MEASURES { cm: 11.0 }] -> (hp) SET rel69. uuid = uuid
MERGE (ctt) - [ rel70: MEASURES { cm: 8.6 }] -> (hp) SET rel70. uuid = uuid
MERGE (ureg) - [ rel71: MEASURES { cm: 11.0 }] -> (hp) SET rel71. uuid = uuid
MERGE (treg) - [ rel72: MEASURES { cm: 9.0 }] -> (hp) SET rel72. uuid = uuid
// Epicotile length (cm)
MERGE (ctrl) - [ rel73: MEASURES { cm: 25.2 }] -> (ep) SET rel73. uuid = uuid
MERGE (ctt) - [ rel74: MEASURES { cm: 25.6 }] -> (ep) SET rel74. uuid = uuid
MERGE (ureg) - [ rel75: MEASURES { cm: 23.4 }] -> (ep) SET rel75. uuid = uuid
MERGE (treg) - [ rel76: MEASURES { cm: 25.3 }] -> (ep) SET rel76. uuid = uuid
Welcome back.
There are a lot of syntax errors in the code, so I could not execute it. It may due to pasting the code. Try inserting it asp reformatted text, using the '</>' symbol in the editor.
Just a note, you are using the following in two places. This will cause the variables above the line to go out of scope after the line. I figure this is not what you want since in the second cases you are performing a lot of matching and then using those variables in your relationship creation. The 'with' clause will make those variables go out of scope.
WITH randomUUID () as uuid
Instead, try the following, or manually list the variables you want passed to the next stage of the query.
WITH *, randomUUID () as uuid
iganea9
June 7, 2023, 5:07pm
3
Other models work with this syntax.with* doesn't work either.
Can you provide your code again, but this time insert it using the '</>' icon in the editor so it does not replace escaped characters?
I will try to figure it out if I can run it locally.
iganea9
June 8, 2023, 10:03am
5
The code is already entered with </>
The issue was that you created your CtrlTherm node with the the label 'CtrlTTherm' (notice the double 'T'), and you were trying to match on 'CtrlTherm'. Since the match was not found the query always quit. I also added an '*' to each with you had for a new UUID in order to pass the values matched to the next phase of the query.
// THE EXPERIMENT “THERMOTOLERANCE”
// Varieties
CREATE (clav: Variety {id: 1, var: 'Clavera'}),
(horb: Variety {id: 2, var: 'Horboveanca'});
// Biostimulatory
CREATE (ctrl: Control {id: 1, ctrl: 'Control Untreated'}),
(ctt: CtrlTherm { id: 2, name: 'Control Treated Thermal'}),
(ureg: UBiostim { id: 3, comp: 'Reglalg Untreated Thermal'}), (treg: TBiostim { id: 4, comp: 'Reglalg Treated Thermal'});
// Params
CREATE(rl: Param{id: 1, param: 'Root Langth'}), (stl: Param{id: 2, param: 'Stem Length'}), (fs: Param{id: 3, param: 'Fresh Stem'}), (fr: Param{id: 4, param: 'Fresh Root'}), (ds: Param{id: 5, param: 'Dry Stem' }),
(dr: Param{id: 6, param: 'Dry Root'}),
(rv: Param{id: 7, param: 'Root Volume'}), (hp: Param {id: 8, param: 'Hypocotyl'}), (ep: Param {id: 9, param: 'Epycotyl'});
// SET uuid
WITH randomUUID() as uuid
// Variety
MATCH (clav: Variety) WHERE clav.id = 1 SET clav. uuid = uuid
WITH clav, uuid
MATCH (horb: Variety) WHERE horb.id = 2 SET horb. uuid = uuid
WITH clav, horb
//Biostims
MATCH (ctrl: Control) WHERE ctrl.id = 1
MATCH (ctt: CtrlTherm) WHERE ctt.id = 2
MATCH (ureg: UBiostim) WHERE ureg.id = 3
MATCH (treg: TBiostim) WHERE treg.id = 4
//Params
MATCH (rl:Param) WHERE rl.id = 1
MATCH (stl:Param) WHERE stl.id = 2
MATCH (fs:Param) WHERE fs.id = 3
MATCH (fr:Param) WHERE fr.id = 4
MATCH (ds:Param) WHERE ds.id = 5
MATCH (dr:Param) WHERE dr.id = 6
MATCH (rv:Param) WHERE rv.id = 7
MATCH (hp:Param) WHERE hp.id = 8
MATCH (ep:Param) WHERE ep.id = 9
WITH *, randomUUID() as uuid
//Variety -> Biostim
MERGE (clav) - [ rel1: UNTREATED ] -> (ctrl) SET rel1. uuid = uuid
MERGE (clav) - [ rel2: TREATED_THERMAL ] -> (ctt) SET rel2. uuid = uuid
MERGE (clav) - [ rel3: UNTREATED_THERMAL ] -> (ureg) SET rel3. uuid = uuid
MERGE (clav) - [ rel4: TREATED_THERMAL ] -> (treg) SET rel4. uuid = uuid
MERGE (horb) - [ rel5: UNTREATED ] -> (ctrl) SET rel5. uuid = uuid
MERGE (horb) - [ rel6: TREATED_THERMAL ] -> (ctt) SET rel6. uuid = uuid
MERGE (horb) - [ rel7: UNTREATED_THERMAL ] -> (ureg) SET rel7. uuid = uuid
MERGE (horb) - [ rel8: TREATED_THERMAL ] -> (treg) SET rel8. uuid = uuid
// Root length (cm)
MERGE (ctrl) - [ rel9: MEASURES { cm: 14.2 }] -> (rl) SET rel9. uuid = uuid
MERGE (ctt) - [ rel10: MEASURES { cm: 1.83 }] -> (rl) SET rel10. uuid = uuid
MERGE (ureg) - [ rel11: MEASURES { cm: 11.7 }] -> (rl) SET rel11. uuid = uuid
MERGE (treg) - [ rel12: MEASURES { cm: 1.83 }] -> (rl) SET rel12. uuid = uuid
// Stem length (cm)
MERGE (ctrl) - [ rel13: MEASURES { cm: 38.2 }] -> (stl) SET rel13. uuid = uuid
MERGE (ctt) - [ rel14: MEASURES { cm: 36.0 }] -> (stl) SET rel14. uuid = uuid
MERGE (ureg) - [ rel15: MEASURES { cm: 48.8 }] -> (stl) SET rel15. uuid = uuid
MERGE (treg) - [ rel16: MEASURES { cm: 43.3 }] -> (stl) SET rel16. uuid = uuid
// Weight of fresh stem
MERGE (ctrl) - [ rel17: WEIGHS { grams: 1.19 }] -> (fs) SET rel17. uuid = uuid
MERGE (ctt) - [ rel18: WEIGHS { grams: 1.19 }] -> (fs) SET rel18. uuid = uuid
MERGE (ureg) - [ rel19: WEIGHS { grams: 1.51 }] -> (fs) SET rel19. uuid = uuid
MERGE (treg) - [ rel20: WEIGHS { grams: 1.23 }] -> (fs) SET rel20. uuid = uuid
// Weight of fresh root
MERGE (ctrl) - [ rel21: WEIGHS { grams: 0.597 }] -> (fr) SET rel21. uuid = uuid
MERGE (ctt) - [ rel22: WEIGHS { grams: 0.493 }] -> (fr) SET rel22. uuid = uuid
MERGE (ureg) - [ rel23: WEIGHS { grams: 0.58 }] -> (fr) SET rel23. uuid = uuid
MERGE (treg) - [ rel24: WEIGHS { grams: 0.667 }] -> (fr) SET rel24. uuid = uuid
// Weight of dried stem
MERGE (ctrl) - [ rel25: WEIGHS { grams: 0.153 }] -> (ds) SET rel25. uuid = uuid MERGE (ctt) - [ rel26: WEIGHS { grams: 0.149 }] -> (ds) SET rel26. uuid = uuid
MERGE (ureg) - [ rel27: WEIGHS { grams: 0.188 }] -> (ds) SET rel27. uuid = uuid
MERGE (treg) - [ rel28: WEIGHS { grams: 0.153 }] -> (ds) SET rel28. uuid = uuid
// Weight of dried root
MERGE (ctrl) - [ rel29: WEIGHS { grams: 0.0366 }] -> (dr) SET rel29. uuid = uuid
MERGE (ctt) - [ rel30: WEIGHS { grams: 0.0305 }] -> (dr) SET rel30. uuid = uuid
MERGE (ureg) - [ rel31: WEIGHS { grams: 0.0389 }] -> (dr) SET rel31. uuid = uuid
MERGE (treg) - [ rel32: WEIGHS { grams: 0.414 }] -> (dr) SET rel32. uuid = uuid
// Root volume
MERGE (ctrl) - [ rel33: MEASURES { ml: 2.0 }] -> (rv) SET rel33. uuid = uuid
MERGE (ctt) - [ rel34: MEASURES { ml: 1.6 }] -> (rv) SET rel34. uuid = uuid
MERGE (ureg) - [ rel35: MEASURES { ml: 2.0 }] -> (rv) SET rel35. uuid = uuid
MERGE (treg) - [ rel36: WEIGHS { grams: 2.2}] -> (rv) SET rel36. uuid = uuid
// Length of the hypocotyl (cm)
MERGE (ctrl) - [ rel37: MEASURES { cm: 11.0 }] -> (hp) SET rel37. uuid = uuid
MERGE (ctt) - [ rel38: MEASURES { cm: 10.3 }] -> (hp) SET rel38. uuid = uuid
MERGE (ureg) - [ rel39: MEASURES { cm: 13.3 }] -> (hp) SET rel39. uuid = uuid
MERGE (treg) - [ rel40: MEASURES { cm: 11.0 }] -> (hp) SET rel40. uuid = uuid
// Epicotile length (cm)
MERGE (ctrl) - [ rel41: MEASURES { cm: 17.8 }] -> (ep) SET rel41. uuid = uuid
MERGE (ctt) - [ rel42: MEASURES { cm: 17.7 }] -> (ep) SET rel42. uuid = uuid
MERGE (ureg) - [ rel43: MEASURES { cm: 21.0 }] -> (ep) SET rel43. uuid = uuid
MERGE (treg) - [ rel44: MEASURES { cm: 11.0 }] -> (ep) SET rel44. uuid = uuid
// Horboveanca variety
// Root length (cm)
WITH *, randomUUID() as uuid
MERGE (ctrl) - [ rel45: MEASURES { cm: 14.2 }] -> (rl) SET rel45. uuid = uuid
MERGE (ctt) - [ rel46: MEASURES { cm: 12.8 }] -> (rl) SET rel46. uuid = uuid
MERGE (ureg) - [ rel47: MEASURES { cm: 14.2 }] -> (rl) SET rel47. uuid = uuid
MERGE (treg) - [ rel48: MEASURES { cm: 13.8 }] -> (rl) SET rel48. uuid = uuid
// Stem length (cm)
MERGE (ctrl) - [ rel49: MEASURES { cm: 60.8 }] -> (stl) SET rel49. uuid = uuid
MERGE (ctt) - [ rel50: MEASURES { cm: 61.8 }] -> (stl) SET rel50. uuid = uuid
MERGE (ureg) - [ rel51: MEASURES { cm: 67.6 }] -> (stl) SET rel51. uuid = uuid
MERGE (treg) - [ rel52: MEASURES { cm: 60.8 }] -> (stl) SET rel52. uuid = uuid
// Weight of fresh stem
MERGE (ctrl) - [ rel53: WEIGHS { grams: 1.53 }] -> (fs) SET rel53. uuid = uuid
MERGE (ctt) - [ rel54: WEIGHS { grams: 1.46 }] -> (fs) SET rel54. uuid = uuid
MERGE (ureg) - [ rel55: WEIGHS { grams: 1.68 }] -> (fs) SET rel55. uuid = uuid
MERGE (treg) - [ rel56: WEIGHS { grams: 1.5 }] -> (fs) SET rel56. uuid = uuid
// Weight of fresh root
MERGE (ctrl) - [ rel57: WEIGHS { grams: 1.0 }] -> (fr) SET rel57. uuid = uuid
MERGE (ctt) - [ rel58: WEIGHS { grams: 0.936 }] -> (fr) SET rel58. uuid = uuid
MERGE (ureg) - [ rel59: WEIGHS { grams: 1.4 }] -> (fr) SET rel59. uuid = uuid
MERGE (treg) - [ rel60: WEIGHS { grams: 1.18 }] -> (fr) SET rel60. uuid = uuid
// Weight of dried stem
MERGE (ctrl) - [ rel61: WEIGHS { grams: 0.264 }] -> (ds) SET rel61. uuid = uuid
MERGE (ctt) - [ rel62: WEIGHS { grams: 0.326 }] -> (ds) SET rel62. uuid = uuid
MERGE (ureg) - [ rel63: WEIGHS { grams: 0.327 }] -> (ds) SET rel63. uuid = uuid
MERGE (treg) - [ rel64: WEIGHS { grams: 0.328 }] -> (ds) SET rel64. uuid = uuid
// Weight of dried root
MERGE (ctrl) - [ rel65: WEIGHS { grams: 0.065 }] -> (dr) SET rel65. uuid = uuid
MERGE (ctt) - [ rel66: WEIGHS { grams: 0.0648 }] -> (dr) SET rel66. uuid = uuid
MERGE (ureg) - [ rel67: WEIGHS { grams: 0.0816 }] -> (dr) SET rel67. uuid = uuid
MERGE (treg) - [ rel68: WEIGHS { grams: 0.078 }] -> (dr) SET rel68. uuid = uuid
// Length of the hypocotyl (cm)
MERGE (ctrl) - [ rel69: MEASURES { cm: 11.0 }] -> (hp) SET rel69. uuid = uuid
MERGE (ctt) - [ rel70: MEASURES { cm: 8.6 }] -> (hp) SET rel70. uuid = uuid
MERGE (ureg) - [ rel71: MEASURES { cm: 11.0 }] -> (hp) SET rel71. uuid = uuid
MERGE (treg) - [ rel72: MEASURES { cm: 9.0 }] -> (hp) SET rel72. uuid = uuid
// Epicotile length (cm)
MERGE (ctrl) - [ rel73: MEASURES { cm: 25.2 }] -> (ep) SET rel73. uuid = uuid
MERGE (ctt) - [ rel74: MEASURES { cm: 25.6 }] -> (ep) SET rel74. uuid = uuid
MERGE (ureg) - [ rel75: MEASURES { cm: 23.4 }] -> (ep) SET rel75. uuid = uuid
MERGE (treg) - [ rel76: MEASURES { cm: 25.3 }] -> (ep) SET rel76. uuid = uuid
iganea9
June 9, 2023, 7:19pm
7
Thank you very much for your help!!!
1 Like
